轻钢外壳的优点

Advantages of Light Steel Enclosures

　　（1）材质轻薄，保持面积大

(1) Lightweight material, maintaining a large area

　　传统的房屋建造方法需要较厚的墙壁来支撑房屋。 因此，墙必须达到约20-25厘米，单个承重墙甚必须达到30厘米。这直接导致房屋可用面积的减少和功能的缺失。但是，轻钢结构房屋可以解决此问题。由于材料轻而薄，因此房屋的墙壁不需要厚。平均厚度为14cm-20cm，住房率可达90％以上。

The traditional method of building houses requires thicker walls to support them. Therefore, the wall must reach approximately 20-25 centimeters, and a single load-bearing wall must even reach 30 centimeters. This directly leads to a reduction in the available area of the house and a lack of functionality. However, light steel structure houses can perfectly solve this problem. Due to the light and thin material, the walls of the house do not need to be thick. The average thickness is 14cm-20cm, and the housing rate can reach over 90%.

　　（2）施工工艺简单，成本低

(2) Simple construction technology and low cost

　　传统的房屋建造方法需要很长时间，并且会受到天气的严重影响。如果天气不好，施工时间可能会延迟。同时，对工人的技术要求比较严格，他们必须是熟练的工人才能完成施工任务。 轻钢结构房屋的施工过程简单，采用全天候施工方式，不受环境和天气的影响。 它可以在一年中的任何时间建造。一般建设期可在1-2个月内完成。

The traditional method of building houses takes a long time and is severely affected by the weather. If the weather is bad, the construction time may be delayed. At the same time, the technical requirements for workers are relatively strict, and they must be skilled workers to complete construction tasks. The construction process of light steel structure houses is simple and adopts an all-weather construction method, which is not affected by the environment and weather. It can be built at any time of the year. The general construction period can be completed within 1-2 months.

　　（3）这些材料可以回收利用并且是的

(3) These materials can be recycled and environmentally friendly

　　传统房屋拆除后，如果产生大量建筑垃圾，必须将其存放在专用停车场内，否则会造成严重的环境污染。轻钢房屋的材料均为新型轻钢，基本上采用出厂标准的标准件。施工期间采用的新施工方法（预组装，干式作业）可以完全拆除并再次使用。90％以上可以重复使用。

After the demolition of traditional houses, if a large amount of construction waste is generated, it must be stored in a dedicated parking lot, otherwise it will cause serious environmental pollution. The materials for light steel houses are all new types of light steel, and basically use factory standard components. The new construction methods used during the construction period (pre assembly, dry operation) can be completely dismantled and reused. More than 90% can be reused.

以上是关于 济南轻型钢结构 的介绍，若想了解相关知识可请点击：//www.lefouu.com 我们将会全心全意为您提供满分服务，欢迎您的来电！

The above is an introduction to Jinan Rolling Shutter Door Factory. If you want to learn more about related knowledge, please click: //www.lefouu.com We will wholeheartedly provide you with full score service. Welcome to call us!