Jinan light steel structure factory building will be affected by many factors in the use process. External factors and human factors coexist. External factors mainly come from steel. What are the specific requirements of factory building for steel?

　　1. 焊接性能

　　1. Welding performance

　　轻钢结构厂房钢的焊接性能是为了在一定的焊接条件下获得性能良好的焊接接头。焊接性能可分为两类:焊接过程中的焊接性能和使用性能中的焊接性能。

　　The welding performance of light steel structure workshop steel is to obtain a good welding joint under certain welding conditions. Welding performance can be divided into two categories: welding performance in welding process and welding performance in service performance.

　　2、强度

　　2, intensity

　　该设计是基于钢的屈服强度。高屈服强度可降低结构自重，节约钢材，降低成本。

　　The design is based on the yield strength of the steel. High yield strength can reduce self weight of structure, save steel and reduce cost.

　　3.冲击韧性

　　3. Impact toughness

　　钢的冲击韧性是指钢在冲击载荷作用下断裂过程中吸收机械动能的能力。它是一种力学性能，可以衡量钢的抗冲击载荷能力，并可能导致脆性断裂，由于低温和应力集中。钢的冲击韧性指数一般是通过标准试样的冲击试验得到的。

　　The impact toughness of steel refers to the ability of steel to absorb mechanical kinetic energy in the process of fracture under impact load. It is a mechanical property that can measure the impact load resistance of steel and may lead to brittle fracture due to low temperature and stress concentration. The impact toughness index of steel is generally obtained by impact test of standard specimen.

　　4、塑料

　　4, plastic

　　钢的塑性一般是指当应力超过屈服点后，钢发生显著的塑性变形而不发生断裂的特性。

　　The plasticity of steel generally refers to that when the stress exceeds the yield point, the steel will undergo significant plastic deformation without fracture.

　　5. 耐用性

　　5. durability

　　钢的耐腐蚀性差，要采取防护措施，防止钢的腐蚀和生锈。防护措施有:定期维护钢漆、镀锌钢、酸、碱、盐等腐蚀性强的介质条件，采用特殊的防护措施，以保护钢护套的功能。

　　As the corrosion resistance of steel is poor, protective measures shall be taken to prevent corrosion and rusting of steel. The protective measures include regular maintenance of corrosive medium conditions such as steel paint, galvanized steel, acid, alkali, salt, etc., and special protective measures to protect the function of steel sheath.

　　6. 冷弯性能

　　6. Cold bending performance

　　轻钢结构厂房钢的冷弯性能是测量钢在室温下弯曲产生塑性变形时的抗裂能力。钢的冷弯性能是通过冷弯试验来测试钢在规定弯曲度下的弯曲变形性能。

　　The cold bending property of light steel structure workshop steel is to measure the crack resistance of steel when it bends at room temperature and produces plastic deformation. The cold bending performance of steel is to test the bending deformation performance of steel under the specified bending degree through the cold bending test.

　　以上就是对厂房对济南轻型钢结构性能要求的详细介绍，想要了解更多请点击官网//www.lefouu.com

　　The above is a detailed introduction to the performance requirements of the workshop for Jinan light steel structure. For more information, please click //www.lefouu.com