铁艺护栏有多种安装方法。用户可根据使用需要选择合适的安装方式。安装时注意调整护栏高度，做好日常保养，避免生锈问题。下面，我们跟随济南铁艺厂家详细了解护栏的安装方法。和保养方法。

There are many installation methods for iron guardrails. Users can choose the appropriate installation method according to their needs. During installation, attention shall be paid to adjusting the height of guardrail and daily maintenance to avoid rusting. Next, we will follow the Jinan Tieyi manufacturer to learn more about the installation method of guardrails. And maintenance methods.

济南铁艺护栏的常规安装方法：

Conventional installation method of Jinan Tieyi guardrail:

1：法兰固定是用膨胀螺栓固定。这种方法需要的工具有：冲击锤、膨胀螺栓、锤子、扳手、螺丝刀、卷尺等，需要注意水泥地面的平整度，拧紧膨胀螺栓。调整立柱垂直度时。

1: The flange is fixed with expansion bolts. The tools required for this method include impact hammer, expansion bolt, hammer, wrench, screwdriver, tape measure, etc. it is necessary to pay attention to the flatness of the cement floor and tighten the expansion bolt. When adjusting the verticality of the column.

2：加长支腿预埋即立柱挖浇。这种方法所需的工具有：水泥、沙子、石头等搅拌工具，以及小推车等运输工具。需要注意的是，在浇筑混凝土时，可以先用石头或砖块固定立柱，然后再浇筑混凝土。只有混凝土在开始时容易移动位置。

2: The lengthened outrigger is embedded, i.e. the column is excavated and poured. The tools required for this method include mixing tools such as cement, sand and stone, and transportation tools such as trolleys. It should be noted that when pouring concrete, the columns can be fixed with stones or bricks before pouring concrete. Only concrete is easily moved at the beginning.

3：下预埋铁焊接固定。这样就需要提前安装预埋铁。安装时，立柱或横管直接焊接在预埋贴纸上。这就要求嵌铁的尺寸和护栏的尺寸要高度一致。,这种安装速度比较快，但是这种安装方式会在一定程度上损坏漆面，损坏的漆面需要打磨上漆。

3: Lower embedded iron shall be welded and fixed. Thus, the embedded iron shall be installed in advance. During installation, the column or horizontal pipe shall be directly welded on the embedded sticker. This requires that the size of the embedded iron should be consistent with the size of the guardrail., The installation speed is relatively fast, but this installation method will damage the paint surface to a certain extent, and the damaged paint surface needs to be polished and painted.

铁艺护栏保养方法：

Maintenance method of  Tieyi guardrail:

定期除尘：室外灰尘随时间飞扬堆积，铁艺产品上会落下一层漂浮的灰尘。会影响铁艺的颜色，从而导致铁艺保护膜的损坏。因此，户外铁艺设施应定期擦拭，一般选用柔软的纯棉面料。

Regular dust removal: outdoor dust will accumulate over time, and a layer of floating dust will fall on iron products. It will affect the color of iron art, resulting in damage to the protective film of iron art. Therefore, outdoor iron facilities should be wiped regularly, and soft pure cotton fabrics are generally used.

如果由于缺乏保养或意外导致铁栅栏局部生锈，要定期用棉布蘸少量防锈油或缝纫机油擦拭铁栅栏表面。如果发现铁栅栏有锈斑，应尽快用棉纱蘸机油涂抹生锈区域，以去除锈迹，而不是直接用砂纸等表面粗糙的材料打磨。

If the iron fence is partially rusted due to lack of maintenance or accident, first wipe the iron fence surface regularly with a cotton cloth dipped in a small amount of anti rust oil or sewing oil. If rust spots are found on the iron fence, the rusted area shall be coated with cotton yarn dipped in engine oil as soon as possible to remove the rust, rather than directly polishing with abrasive paper and other rough surface materials.

关于运输和装卸：要在出厂前做好包装，防止在装卸过程和运输过程中护栏被磨损。如果在安装过程中漆面磨损，就会影响护栏的美观。

As for transportation and loading and unloading: first of all, package before leaving the factory to prevent the guardrail from being worn during loading, unloading and transportation. If the paint surface is worn during installation, it will affect the beauty of the guardrail.

济南铁艺护栏由厂家完成后，要经过装卸运输到工地的过程，然后安装。用户可根据实际情况选择合适的安装方式，做好除尘维护工作。

After Jinan Tieyi guardrail is completed by the manufacturer, it shall be loaded, unloaded and transported to the construction site, and then installed. The user can choose the appropriate installation method according to the actual situation and do a good job in dust removal maintenance.

以上就是问题解答的相关内容了，希望能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站//www.lefouu.com并咨询我们的工作人员，将竭诚为您服务。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website //www.lefouu.com And consult our staff, will serve you wholeheartedly.