济南铁艺大门是很多家庭喜欢用的，现在的别墅大门生产工艺已经不会很难，在市面上也可以看到有很多别墅庭院大门款式，但是别墅铁艺大门安装是一个难题，作为业主，了解别墅铁艺大门安装验收标准，在验收时才能知道别墅铁艺大门安装效果好不好，下面就来看看怎么安装和验收吧。

Villa iron gate is used by many families. Now the production process of villa gate is not very difficult. There are many villa courtyard gate styles in the market, but the installation of villa iron gate is a problem. As an owner, understand the installation and acceptance standards of villa iron gate, and you can know whether the installation effect of villa iron gate is good at the time of acceptance. Let's see how to install and accept it.

一、门套安装

1、 Door pocket installation

1.门套安装好后，在各连接地方应该是无缝隙、严密的。所有的固定配件都是紧固的，不会松动。门套对角线要准确，允许1.5mm以下的误差。

1. After the door pocket is installed, the joints should be seamless and tight. All fixing accessories are fastened and will not loosen. The diagonal of the door pocket shall be accurate, and the error below 1.5mm is allowed.

2.门套的侧框和横框是水平垂直的，垂直侧框允许公差+2mm，水平横框公差允许+1mm；门套与墙体接合应该用固定螺钉，缝隙用发泡胶双面密封，后期处理平整；如果门套宽度大于20出门，应该用到固定铁片。

2. The side frame and transom of the door pocket are horizontal and vertical, the allowable tolerance of the vertical side frame is +2mm, and the tolerance of the horizontal transom is +1mm; The connection between the door pocket and the wall should be fixed with screws, and the gap should be sealed on both sides with styrofoam, and the post-treatment should be smooth; If the door pocket width is greater than 20, a fixed iron sheet should be used.

二、套线安装

2、 Threading installation

安装套线接口应该是没有缝隙、严密、表面平整。套线与墙面缝隙也要用密封胶填好。

The installation socket should be seamless, tight and flat. The gap between the wiring and the wall should also be filled with sealant.

三、门扇安装

3、 Door leaf installation

1.门扇方向要正确，开关比较灵活，没有异常响声。

1. The direction of the door leaf should be correct, and the switch should be flexible without abnormal sound.

2.门套与门扇之间留有缝隙，下面的大约6mm，与其他三面约为2mm，允许有0.5mm的差别。

2. There is a gap between the door pocket and the door leaf, which is about 6mm below and about 2mm from the other three sides, with a difference of 0.5mm allowed.

3.关上门后，门扇与密封条是紧密接合，没有发生摆动。

3. After closing the door, the door leaf and the sealing strip are closely connected without swinging.

四、五金

4、 Hardware

1.门合页应垂直、平整，在门适当的位置开槽，规范的做工，允许有0.5mm的差异，开始时合页是正常灵活的，合页固定螺钉要装齐全，可以隐藏在合页平面。

1. The door hinge should be vertical and flat, slotted at the appropriate position of the door, standard workmanship, allowing a difference of 0.5mm. At the beginning, the hinge is normal and flexible, and the hinge fixing screws should be installed completely, which can be hidden in the hinge plane.

2.门锁开槽准确，方便日常的开启，在关门开门上，钥匙使用无明显的异响，配件是的。

2. The slotting of the door lock is accurate and convenient for daily opening. When closing and opening the door, there is no obvious abnormal sound when using the key, and the accessories are safe.

3.缓冲、拉手、吸闭门器安装在设计好的位置上，安装牢固，保证配件使用效果是好的。

3. The buffer, handle and door closer shall be installed at the designed position and firmly installed to ensure the good use effect of accessories.

五、外观

5、 Appearance

1.从整体外观上，与地面接合的地方缝隙要在3mm以内，并用防水密封胶把缝隙密封好。

1. From the overall appearance, the gap at the joint with the ground should be within 3mm, and the gap should be sealed with waterproof sealant.

2.整个济南铁艺大门看起来没有划痕，做好清洁，视觉效果好。

2. The whole Jinan Tieyi gate looks free of scratches. It is clean and has good visual effect.

会减少别墅铁艺大门的使用寿命。安装结束后，在平时多注意别墅铁艺大门保养，避免划伤别墅铁艺大门表面，让别墅铁艺大门使用年限更加久。更多相关事项就来我们网站//www.lefouu.com咨询了解。

It will reduce the service life of the iron gate of the villa. After installation, pay more attention to the maintenance of villa iron gate at ordinary times to avoid scratching the surface of villa iron gate and make the service life of villa iron gate longer. Come to our website for more related matters //www.lefouu.com Consult and understand.