铝艺大门可以批量化生产，关键装饰部件采用沙铸和压铸，无需进行热镀锌加工等，在保证效果的同时降低了成本，铝给人的印象是不生锈高等，在我们选购铝艺门的时候会在很大的程度上提高视觉的上的美感，使得我们的庭院整体更加的具有魅力。
Aluminum art doors can be mass-produced, with key decorative components made of sand casting and die-casting, without the need for hot-dip galvanizing processing, while ensuring effectiveness and reducing costs. Aluminum gives the impression of not rusting and high quality. When we choose aluminum art doors, it will greatly enhance the visual beauty, making our courtyard more attractive as a whole.
铝艺门具有遮挡视线的作用
Aluminum doors have the function of blocking vision
比如木质推拉门或是玻璃推拉门，它们对光线的遮挡程度都是不相同的，所以其材质的不同决定着其透明度的差异，但由于铝艺门放置的位置不同，对其功能的要求也是不同的，一般大的空间分隔成小空间除了要考虑推拉门的材质问题之外还有考虑所在空间的采光问题，所以，不同的功能区域对透明度的要求也各有差异，如果对采光的要求就比较高一些，可选用透明度良好的玻璃推拉门做分隔。也就是说，我们的铝艺门选购，也是要看阳台与哪些区域功能的分割。

For example, wood Sliding door or glass Sliding door have different degrees of occlusion of light, so their different materials determine their different transparency. However, due to different locations of aluminum doors, the requirements for their functions are also different. Generally, large spaces are divided into small spaces. In addition to the material of Sliding door, daylighting in the space should also be considered, Different functional areas have different requirements for transparency. If the requirements for lighting are higher, glass Sliding door with good transparency can be used for separation. That is to say, when choosing our aluminum art door, it also depends on the functional division between the balcony and which areas.
铝艺门的滑轮
Pulley for aluminum door
作为很重要的五金件之一，它的质量和耐用程度决定着推拉门的使用寿命。质量比较好一些的滑轮，中 心采用的是精制的滚珠轴承，其材质又分为铁、不锈钢和NRS型，承重耐用的效果也依次增强，外表包有改性的PPS材料，和铝合金相比要更加坚硬一些，易耐磨抗压。质量比较低劣的滑轮一般在外部采用普通的工程塑料，比较容易碎裂，中 心几乎是未采用轴承，只靠涂抹的润滑油，然后通过机械摩擦来达到滑动效果，这样很容易沾染灰尘，而且一旦油脂干燥，就会出现阻塞、无法滑动的现象，当然，也有采用普通轴承的滑轮，但是因为做工的精致度不够，铝艺门在推拉的时候会很沉，需要很用力。
As one of the most important hardware, its quality and durability determine the service life of Sliding door. The pulley with better quality uses refined ball bearings in the center, which are divided into iron, stainless steel, and NRS types. Its load-bearing and durable effects are also enhanced in turn. The surface is coated with modified PPS material, which is harder than aluminum alloy and is easy to wear and resist pressure. Pulleys with relatively poor quality are generally made of ordinary engineering plastic on the outside, which is prone to breakage. The center is almost without bearings and only relies on the lubricating oil applied, which is then mechanically rubbed to achieve sliding effect. This can easily become contaminated with dust, and once the grease dries, it will become blocked and unable to slide. Of course, there are also pulleys with ordinary bearings, but due to insufficient precision in workmanship, Aluminum doors can be very heavy when pushed and pulled, requiring a lot of force.